Added feature to disable Target ID check during resurrection
If current ID is not supported by a DLL, user can switch off ID check and still be able to try resurrection.
Though, we don't recommend it. Do it only if you are sure what you're doing and if you're sure that device
with unmatched target ID is still exactly the same model as stated in DLL.
Please note, upon JTAG Manager exe startup this option is automatically switched off.
To disable Target ID do the following:
-> Box Service -> Advanced Settings -> Tick "Ignore TARGET IDCODE . . ."
Added preset "Erase Full NAND/NOR Memory" (for this use Settings by Code button)
DCC operations presets will ensure proper use of DCC TAB features. To select DCC Operation preset, do the following:
-> DCC Read/Write TAB -> Settings By Code -> Select desired preset
Firmware 1.29
---------------------------
If current ID is not supported by a DLL, user can switch off ID check and still be able to try resurrection.
Though, we don't recommend it. Do it only if you are sure what you're doing and if you're sure that device
with unmatched target ID is still exactly the same model as stated in DLL.
Please note, upon JTAG Manager exe startup this option is automatically switched off.
To disable Target ID do the following:
-> Box Service -> Advanced Settings -> Tick "Ignore TARGET IDCODE . . ."
Added preset "Erase Full NAND/NOR Memory" (for this use Settings by Code button)
DCC operations presets will ensure proper use of DCC TAB features. To select DCC Operation preset, do the following:
-> DCC Read/Write TAB -> Settings By Code -> Select desired preset
Firmware 1.29
---------------------------
- MPCore targets handling is improved.
- Fixed bug in the ARM7 handling routines: h/w breakpoints were disabled each time any halt operation was performed
- Added auxiliary instruction which improves GDB Server functionality.