LG nexus 5 repair CWM Mount şifresi
Welcome to Octoplus/Octopus Box LG Software version 2.3.3
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM307
Selected model: H791
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5X
Firmware version:
Kernel version: 3.10.73-gc28506a (android-
build@vpee8.mtv.corp.google.com) (gcc version 4.9.x-google 20140827
(prerelease) (GCC) ) #1 SMP PREEMPT Thu Apr 14 22:40:19 UTC 201
Android version: 6.0.1
Hardware: Qualcomm Technologies, Inc MSM8992 AArch64 Processor rev
3 (aarch64)
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is not rooted.
Sending exploit...OK
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Recovery...OK
To Root the phone, please perform the following steps:
1. Select "Recovery mode" (use Vol+, Vol-), then boot into "Recovery"
(press "Power" button);
2. Press "Install" and go into "Octo_Root" folder in the phone;
3. Select "supersu.zip" and press "Add more zips";
4. Select "busybox.zip" and press "Add more zips";
5. Select "quick-reboot.zip" then swipe to confirm flash;
6. Press "Reboot System";
7. Please, wait while the phone will turn on and press "OK" button.
Press "Grant" button on the phone every time when superuser dialog
appears
Checking root access...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Enable "Settings" -> "Developer options" -> "OEM unlocking" option
7. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.OKFailed!
Error code: ADB0000001
Performed by 2.3.3 software version.
cihaz cwm içinde Octo_root klaörü yok Mount yapmak istediğimizde ise şifre soruyor
TWRP 3.0.0-0 touch recovery
Welcome to Octoplus/Octopus Box LG Software version 2.3.3
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM307
Selected model: H791
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5X
Firmware version:
Kernel version: 3.10.73-gc28506a (android-
build@vpee8.mtv.corp.google.com) (gcc version 4.9.x-google 20140827
(prerelease) (GCC) ) #1 SMP PREEMPT Thu Apr 14 22:40:19 UTC 201
Android version: 6.0.1
Hardware: Qualcomm Technologies, Inc MSM8992 AArch64 Processor rev
3 (aarch64)
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is not rooted.
Sending exploit...OK
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Recovery...OK
To Root the phone, please perform the following steps:
1. Select "Recovery mode" (use Vol+, Vol-), then boot into "Recovery"
(press "Power" button);
2. Press "Install" and go into "Octo_Root" folder in the phone;
3. Select "supersu.zip" and press "Add more zips";
4. Select "busybox.zip" and press "Add more zips";
5. Select "quick-reboot.zip" then swipe to confirm flash;
6. Press "Reboot System";
7. Please, wait while the phone will turn on and press "OK" button.
Press "Grant" button on the phone every time when superuser dialog
appears
Checking root access...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Enable "Settings" -> "Developer options" -> "OEM unlocking" option
7. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.OKFailed!
Error code: ADB0000001
Performed by 2.3.3 software version.
cihaz cwm içinde Octo_root klaörü yok Mount yapmak istediğimizde ise şifre soruyor
TWRP 3.0.0-0 touch recovery
Ziyaretçiler için gizlenmiş link,görmek için
Giriş yap veya üye ol.
Ziyaretçiler için gizlenmiş link,görmek için
Giriş yap veya üye ol.
