Oppo A83 Pattern and FRP Lock Remove with Hydra Tool
- first keep press boot info
- Service Function
- Format/Factory Reset/ScreenLock
- Auto
- Select FRP Lock Remove
- first keep press boot info
Kod:
-------------------------------------------------------
To Enable BROM Mode :
Method 1 - Bootkey (Vol + - Power) or any combination
Method 2 - Enable Preloader to brom(crashing Method)
Method 3 - Test Point Data0 + ground
To Enable Preloader Mode :
Method 1 - Just Insert cable
-------------------------------------------------------
Searching for MTK Device...Found
MTK Port Type : Flashmode BROM
FriendlyName : MediaTek USB Port_V1633 (COM4)
Device : /6&299c7bb&0&1
SymbolicName : \\?\usb#vid_0e8d&pid_0003#6&299c7bb&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver : 01/22/2015,3.0.1504.0
Service : wdm_usb
Openning Port [COM4] Ok
Handshaking...Ok
HwCode : 0690 {MT6763}
Hwver : 0000
Target config : E5
SBC : 01 (True)
SLA : 00 (False)
DAA : 04 (True)
SWJTAG : 04 (True)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 20 (True)
MEMWRITE : 40 (True)
CMD_C8 : 80 (True)
Connection : BROM
HW Subcode : 8A00
HW Subcode : CA01
SW Ver : 0001
ME_ID : 5B26A76B463E98656D76AEE6E234A69D
SOC_ID : 118B2B4D26BFB93B14444D5F4BEB3F9DD2B2870F357BD4AB48DA0404A68E2C30
Exploiting Device...
Successfully Exploited..
Handshaking...Ok
Dumping Preloader from Bootrom..
Seeking preloader address..
Not Found
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Connection : BROM
Preparing Download Agent..[MTK_AllInOne_DA_5.2152.bin]
Patching da2 ... Ok
Uploading Stage 1....
Successfully uploaded stage 1, jumping ..
Executing JUMP_DA Address @ 0x00200000
Jumping to 0x00200000 Ok 0xC0
Successfully received DA sync
ONNECTION_AGENT : brom
DRAM config needed for : 90014A4842473461
Sending auto preloader from dump...
Hydra Auto Preloader Search Enabled..
Hydra will find compatible preloader files...
-----------------------------
Found 3 Compatible Preloaders..
-----------------------------
1-preloader_k63v2_64_bsp_ulax5.bin...Sending... [DRAM setup passed.] [Ok]
-----------------------------
Sending emi data succeeded.
Uploading stage 2...
Upload data was accepted. Jumping to stage 2...
Successfully uploaded stage 2
ERAM Size : 0x0000000000040000-256 KB
IRAM Size : 0x00000000C0000000-3 GB
EMMC Boot1 Size : 0x0000000000400000-4 MB
EMMC Boot2 Size : 0x0000000000400000-4 MB
EMMC RPMB Size : 0x0000000000400000-4 MB
EMMC USER Size : 0x0000000747C00000-29.121 GB
EMMC CID : 90014A484247346132A51F70E83715ED - HBG4a2
HW-CODE : 0x690
HWSUB-CODE : 0x8A00
HW-VERSION : 0xCA01
SW-VERSION : 0x1
CHIP-EVOLUTION : 0x0
DA-VERSION : 1.0
Speed : high-speed
Upload data was accepted. Jumping to stage 2...
DA Extensions successfully added
Reading Partition Table ..
Partition Count : 42
--------------- Reading build.prop content ---------------
Brand : OPPO
Vendor : OPPO
Model : OPPO A83js
Product : oppo6763_17101
Manufacturer : OPPO
ID : N6F26Q
SDK : 25
Release : 7.1.1
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Locale : en-US
Description : full_oppo6763_17101-user 7.1.1 N6F26Q 1599151965 release-keys
Device : M6763D
Display ID : A83jsEX_11_A.35_200903
Security Patch : 2019-10-05
Platform : mt6763
StorageType : mtp
--------------- end of build.prop content ---------------
Reading IMEI........
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
Backing up Security..
- preloader(preloader.bin), 512 KB = Ok [preloader_oppo6763_17101.bin]
*Creating Scatter file... C:\Hydra Tool\Backup\MTKBKUP\0690_5B26A76B463E98656D76AEE6E234A69D\Auto\072823170059\6763_Android_scatter.txt
- pgpt(pgpt.bin), 32 KB = Ok
- nvram(nvram.bin), 64 MB = Ok
- nvdata(nvdata.bin), 64 MB = Ok
- frp(frp.bin), 1024 KB = Ok
- protect1(protect1.bin), 8 MB = Ok
- protect2(protect2.bin), 12.469 MB = Ok
- persist(persist.bin), 48 MB = Ok
- proinfo(proinfo.bin), 3 MB = Ok
- oppo_custom(oppo_custom.bin), 1024 KB = Ok
- nvcfg(nvcfg.bin), 32 MB = Ok
- sec1(sec1.bin), 2 MB = Ok
- seccfg(seccfg.bin), 8 MB = Ok
- lk(lk.bin), 1024 KB = Ok
Backup Done!!!
Elapsed Time : 00:01:14- Service Function
- Format/Factory Reset/ScreenLock
- Auto
Kod:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Service Function
Format/Factory Reset/ScreenLock
Auto
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Searching for MTK Device...Found
MTK Port Type : Flashmode BROM
FriendlyName : MediaTek USB Port_V1633 (COM4)
Device : /6&299c7bb&0&1
SymbolicName : \\?\usb#vid_0e8d&pid_0003#6&299c7bb&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver : 01/22/2015,3.0.1504.0
Service : wdm_usb
Openning Port [COM4] Ok
Reading Partition Table ..
ERAM Size : 0x0000000000040000-256 KB
IRAM Size : 0x00000000C0000000-3 GB
EMMC Boot1 Size : 0x0000000000400000-4 MB
EMMC Boot2 Size : 0x0000000000400000-4 MB
EMMC RPMB Size : 0x0000000000400000-4 MB
EMMC USER Size : 0x0000000747C00000-29.121 GB
EMMC CID : 90014A484247346132A51F70E83715ED - HBG4a2
HW-CODE : 0x690
HWSUB-CODE : 0x8A00
HW-VERSION : 0xCA01
SW-VERSION : 0x1
CHIP-EVOLUTION : 0x0
DA-VERSION : 1.0
Speed : high-speed
Partition Count : 42
--------------- Reading build.prop content ---------------
Brand : OPPO
Vendor : OPPO
Model : OPPO A83js
Product : oppo6763_17101
Manufacturer : OPPO
ID : N6F26Q
SDK : 25
Release : 7.1.1
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Locale : en-US
Description : full_oppo6763_17101-user 7.1.1 N6F26Q 1599151965 release-keys
Device : M6763D
Display ID : A83jsEX_11_A.35_200903
Security Patch : 2019-10-05
Platform : mt6763
StorageType : mtp
--------------- end of build.prop content ---------------
Reading IMEI........
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
------------------------------
Factory Reset Flash Mode..
------------------------------
Operation : Safeformat Universal...
Action Result : Ok
Elapsed Time : 00:00:12- Select FRP Lock Remove
Kod:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Service Function
Factory Reset Protection[FRP]
Auto
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Searching for MTK Device...Found
MTK Port Type : Flashmode BROM
FriendlyName : MediaTek USB Port_V1633 (COM4)
Device : /6&299c7bb&0&1
SymbolicName : \\?\usb#vid_0e8d&pid_0003#6&299c7bb&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver : 01/22/2015,3.0.1504.0
Service : wdm_usb
Openning Port [COM4] Ok
Reading Partition Table ..
ERAM Size : 0x0000000000040000-256 KB
IRAM Size : 0x00000000C0000000-3 GB
EMMC Boot1 Size : 0x0000000000400000-4 MB
EMMC Boot2 Size : 0x0000000000400000-4 MB
EMMC RPMB Size : 0x0000000000400000-4 MB
EMMC USER Size : 0x0000000747C00000-29.121 GB
EMMC CID : 90014A484247346132A51F70E83715ED - HBG4a2
HW-CODE : 0x690
HWSUB-CODE : 0x8A00
HW-VERSION : 0xCA01
SW-VERSION : 0x1
CHIP-EVOLUTION : 0x0
DA-VERSION : 1.0
Speed : high-speed
Partition Count : 42
--------------- Reading build.prop content ---------------
Brand : OPPO
Vendor : OPPO
Model : OPPO A83js
Product : oppo6763_17101
Manufacturer : OPPO
ID : N6F26Q
SDK : 25
Release : 7.1.1
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Locale : en-US
Description : full_oppo6763_17101-user 7.1.1 N6F26Q 1599151965 release-keys
Device : M6763D
Display ID : A83jsEX_11_A.35_200903
Security Patch : 2019-10-05
Platform : mt6763
StorageType : mtp
--------------- end of build.prop content ---------------
Reading IMEI........
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
Rebooting Device...
Reboot Option : OperationDone
Rebooting Operation Done!!!!
Action Result : Ok
Elapsed Time : 00:00:13