Octoplus Octopus Tüm Güncellemeler (1 Viewer)

looupss

looupss

Kıdemli Üye
Kıdemli Üye
Kayıtlı Kullanıcı
Octoplus/Octopus Box Samsung Software v.1.7.8 Release Notes



  • Added support for the following models:
- SM-G313H - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G313HN - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G313HU - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G313HY - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G313HZ - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G313M - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G313ML - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G313MY - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G313U - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G350E - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G355H - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G355HN - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G355HQ - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-G355M - added Direct Unlock, Repair IMEI (A/B), Repair Network, Write Firmware, Read/Write Cert (A/B), Read/Write Security, Read/Write EFS, Read Pit, Reboot in Download/Recovery Mode
- SM-B310E - added Direct Unlock, Read codes, Read User Code, Write Firmware, Read/Write FullFlash, Read/Write/Repair NV
- GT-E1200I, GT-E1200R - added Read User Code
- GT-E1202I - added Read User Code
- GT-E1205Y - added Read User Code
- GT-E1270 - added Read User Code
- GT-E1280 - added Read User Code
- GT-E1282T - added Read User Code
- GT-E2200 - added Read User Code
- GT-E2202 - added Read User Code
- GT-I8262, GT-I8262L, GT-I8262B, GT-I8262D - added Read/Write QCN
- GT-S7562, GT-S7562L, GT-S7562I - added Read/Write QCN
- GT-I5800, GT-I5800L - improved Direct Unlock, Read Codes, Repair IMEI operations
- GT-I5801 - improved Direct Unlock, Read Codes, Repair IMEI operations
- GT-I9192 - improved Read/Write QCN
​

  • All supported operations are described in details in the manual ("Cable & Manual" button in Software).

More info and discussion are
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

_____________________________


Octoplus Box JTAG Software v.1.7.5 Release Notes



  • Added support for the following models:
- LG D370 - added Dead Boot Repair via USB
- LG D370TR - added Dead Boot Repair via USB
- LG D373 - added Dead Boot Repair via USB
- LG D373EU - added Dead Boot/Device Repair via USB
- LG D375 - added Dead Boot Repair via USB
- LG D410 - added Dead Boot/Device Repair via USB
- LG D410H - added Dead Boot Repair via USB
- LG D410NH - added Dead Boot Repair via USB
- Huawei G510-0010 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
- Huawei Y301-A1 (MetroPCS) - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
​

  • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

More info and discussion are
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

_____________________________
WBR,
Octoplus Box Team
 
D

DroiD

Deneyimli Üye
Deneyimli Üye
Kayıtlı Kullanıcı
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

Octoplus/Octopus Box Samsung Software v.2.0.8 is out!​
We never stay still, always moving forward! Today we brought You another update with some old stuff improved and many many new features added!
As usual, no annual fees, no servers, no Internet required... Fast and efficient. Octopus - always ready to serve!

We have added support for Galaxy Tab S2, additional support for Note 5, Galaxy Edge+ and much more!

Octoplus/Octopus Box Samsung Software v.2.0.8 Release Notes
  • Added support for the following models:

- SM-N920F - added Direct Unlock, Write Cert
- SM-N920G - added Direct Unlock, Write Cert
- SM-N920I - added Direct Unlock, Write Cert
- SM-N920K - added Direct Unlock, Write Cert
- SM-N920L - added Direct Unlock, Write Cert
- SM-N920S - added Direct Unlock, Write Cert
- SM-N9200 - added Direct Unlock, Write Cert
- SM-N920W8 - added Direct Unlock, Write Cert
- SM-G928F - added Direct Unlock, Write Cert
- SM-G928K - added Direct Unlock, Write Cert
- SM-G928L - added Direct Unlock, Write Cert
- SM-G928S - added Direct Unlock, Write Cert
- SM-G928I - added Direct Unlock, Write Cert
- SM-G928W8 - added Direct Unlock, Write Cert
- SM-G9287 - added Direct Unlock, Read Codes, Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode, Read PIT
- SM-G9287C - added Direct Unlock, Read Codes, Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode, Read PIT
- SM-T715 - added Direct Unlock, Read Codes, Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode, Read PIT
- SM-T715C - added Direct Unlock, Read Codes, Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode, Read PIT
- SM-T715N0 - added Direct Unlock, Read Codes, Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode, Read PIT
- SM-T715Y - added Direct Unlock, Read Codes, Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode, Read PIT
- SM-T815 - added Direct Unlock, Read Codes, Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode, Read PIT
- SM-T815C - added Direct Unlock, Read Codes, Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode, Read PIT
- SM-T815N0 - added Direct Unlock, Read Codes, Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode, Read PIT
- SM-T815Y - added Direct Unlock, Read Codes, Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode, Read PIT
- SM-B350E - added Direct Unlock, Read Codes, Read/Write/Repair NV, Repair IMEI (A/B), Read/Write Cert
- SM-G530P - added Direct Unlock, **Domestic Unlock, Read/Write NVM, Read/Write Security, Read/Write/Repair EFS, Wipe Security, Read/Write QCN, Write Cert
- GT-E1205Q - added Direct Unlock, Read codes, Read User Code, Repair IMEI, Read/Write Full Flash, Read/Write/Repair NV
- SM-B105E - added Direct Unlock, Read Codes, Read User Code, Repair IMEI (A/B), Read/Write/Repair NV, Read/Write Full Flash, Write Firmware
- SM-B109E - added Direct Unlock, Read Codes, Read User Code, Repair IMEI (A/B), Read/Write/Repair NV, Read/Write Full Flash, Write Firmware
- SM-B110E - added Direct Unlock, Read Codes, Read User Code, Repair IMEI (A/B), Read/Write/Repair NV, Read/Write Full Flash, Write Firmware
- SM-T2397 - added Direct Unlock, Read/Write EFS, Read/Write Cert, Reboot in Download/Recovery mode
- SM-T350 - added Direct Unlock, Read/Write NVM, Reset MSL, Read/Write/Repair Security, Read/Write EFS, Read/Write QCN, Write Cert, Enable DIAG
- SM-T705W - added Direct Unlock, Read/Write Security, Read/Write EFS, Read/Write Cert
- SM-T707A - added Direct Unlock, Read/Write Security, Read/Write EFS, Read/Write Cert
- SM-T707V - added Direct Unlock, Read/Write Security, Read/Write EFS, Read/Write Cert
- SM-T807A - added Direct Unlock, Read/Write Security, Read/Write EFS, Read/Write Cert
- SM-G360P - added **Domestic Unlock
- SM-T237P - added **Domestic Unlock
- SM-T807P - added **Domestic Unlock
- SM-G900P - added **Domestic Unlock
- SM-G920P - added **Domestic Unlock
- SM-G925P - added **Domestic Unlock
- SM-N900P - added **Domestic Unlock
- SM-N910P - added **Domestic Unlock
- SM-N915P - added **Domestic Unlock
- SM-N920P - added **Domestic Unlock
- SPH-L710 - added Direct Unlock, **Domestic Unlock
- SPH-L720 - added **Domestic Unlock, improved Direct Unlock operation
- SPH-L720T - added Direct Unlock, **Domestic Unlock, Repair IMEI, Read/Write/Repair NVM, Read/Write Security, Read/Write/Repair EFS, Read PIT, Reset Screen Lock, Reboot in Download/Recovery Mode
- SPH-L900 - added Direct Unlock, **Domestic Unlock
​
  • Added support for new type of Security for Galaxy S6, Galaxy S6 Edge phones:

- SM-G920A
- SM-G920AZ
- SM-G920F
- SM-G920FD
- SM-G920FZ
- SM-G920I
- SM-G920K
- SM-G920L
- SM-G920S
- SM-G920W8
- SM-G925A
- SM-G925F
- SM-G925FQ
- SM-G925I
- SM-G925K
- SM-G925L
- SM-G925S
- SM-G925W8
​
  • Improved Read Codes operation (from now on it is faster and no need to reboot device during the process) for supported Note 5 and Galaxy Edge+ devices:

- SM-N920F
- SM-N920G
- SM-N920I
- SM-N920K
- SM-N920L
- SM-N920S
- SM-N9200
- SM-N920W8
- SM-G928F
- SM-G928K
- SM-G928L
- SM-G928S
- SM-G928I
- SM-G928W8
​
  • New Cert files were uploaded into the Support Area
  • ** Domestic Unlock means: unlock of Sprint mobile phones for further use with any USA GSM Carrier
  • All supported operations are described in details in Software manual ("Cable & Manual" button in Software)























Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
Find out more at:
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus/Octopus Box LG v.2.5.6 is out!
​
Added world’s first support for LG X Power, LG V20!

Added support for LG G5; possibility to write «*.kdz» firmwares for a number of MTK-based phones and more!

Octoplus/Octopus Box LG Software v.2.5.6 Release Notes:
? Added support for the following models:
​
- K220T - added world’s first Direct Unlock, Read Codes, Repair IMEI, Reset FRP Lock, Read/Write Firmware, Read/Write EEPROM, Read Full Flash, Repair BT/Wi-Fi MAC Address, Read Info
- H990T - added world’s first added world's first Direct Unlock, Repair IMEI, Read/Write QCN, Read/Write NVM, Read/Reset Security, Reset FRP, Write Firmware, Read Full Flash
- US996 - added world’s first Repair IMEI, Read/Write QCN, Read/Write NVM, Read/Reset Security, Reset FRP, Write Firmware, Read Full Flash, Repair MEID, Read/Write PRL, Repair AKEY/SSD_A/SSD_B/OTKSL/SPC
- H831 - added Direct Unlock, Repair IMEI, Read/Write QCN, Read/Write NVM, Read/Reset Security, Reset FRP, Write Firmware, Read Full Flash, Repair BT/Wi-Fi MAC Address
- H910 - added Direct Unlock, Repair IMEI, Read/Write QCN, Read/Write NVM, Read/Reset Security, Reset FRP, Write Firmware, Read Full Flash
- H915 - added Direct Unlock, Repair IMEI, Read/Write QCN, Read/Write NVM, Read/Reset Security, Reset FRP, Write Firmware, Read Full Flash
​
? Added "Reset FRP" operation for the following models:​
- H950, H950PR
- H955 (thanks to mr. Aouedraogo03 and to mr_Meralikhil)
- H955A, H955AR, H955HK, H955P, H955TR
- F570S (thanks to mr. Aamir_Zia)
​
? Added "Read Firmware" and "Write Firmware" (in "*.oct" and "*.kdz" formats) operations for the following models:
​
- K100, K100DS, K100E, K100TR
​
? Added possibility to write «*.kdz» firmwares for the following MTK-based phones:
​
- K4 (K120AR, K120E, K120F, K120GT, K120H, K130, K130E, K130F, K130Y)
- K8 (K350, K350AR, K350DS, K350NDS, K350E, K350F, K350H, K350K, K350N, K350TR, K350Y, K350Z)
- K10 (K430AR, K430DS, K430DSF, K430DSE, K430DSY, K430F, K430H, K430N, K430T, K430TR, K430TV, K430Y)
- X Power (K220, K220DS, K220DSF, K220DSK, K220DSZ, K220H, K220T, K220Y, K220Z)
- X Max (K240, K240F, K240H)
- X Cam (K580, K580AR, K580DS, K580DSF, K580DSK, K580DSZ, K580F, K580H, K580I, K580TR, K580Y, K580Z)
​
? All supported operations described in details in software manual ("Cable & Manual" button in the software).​
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
​
Find out more at:
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
[/URL]
 
S

sas24

Deneyimli Üye
Deneyimli Üye
Kayıtlı Kullanıcı
Octoplus / Octopus Box Samsung Software v.2.4.7 is out!

28.12.16
Octoplus / Octopus Box Samsung Software v.2.4.7 is out!
Added world's first support for Galaxy Grand Prime+ series and world's first support for Note 4 phones with latest security/Android 6.0 versions of firmware.
Improved Direct Unlock, Read Codes, Read/Write Cert operation for various Exynos-based phones.
Octoplus / Octopus Box Samsung Software v.2.4.7 Release Notes:
​


  • [*=center]Added support for the following models:
    • SM-G532F - added Direct Unlock, Read Codes, Read Cert, Reset FRP (via ADB), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware
    • SM-G532FD - added world's first Direct Unlock, Read Codes, Read Cert, Reset FRP (via ADB), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware
    • SM-G532G - added Direct Unlock, Read Codes, Read Cert, Reset FRP (via ADB), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware
    • SM-G532M - added Direct Unlock, Read Codes, Read Cert, Reset FRP (via ADB), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware
    • SM-G532MT - added world's first Direct Unlock, Read Codes, Read Cert, Reset FRP (via ADB), Read/Write Security, Read/Write EFS, Read PIT, Write Firmware

    [*=center]Added world's first support for latest security/Android 6.0 versions of firmware (Direct Unlock, Read/Write Cert) for the next models:
    • SM-N910C, SM-N910H, SM-N910K, SM-N910L, SM-N910S, SM-N910U
    • SM-N916K, SM-N916L, SM-N916S

    [*=center]Improved Direct Unlock, Read Codes, Read/Write Cert operation for the following Exynos-based phones (from now on it is much faster):
    • Galaxy ON5 (SM-G550T, SM-G550T1, SM-G550T2)
    • Galaxy J2 (SM-J200F, SM-J200BT, SM-J200G, SM-J200GU, SM-J200M, SM-J200Y)
    • Galaxy ON5 (SM-G5500, SM-G550F, SM-G550FY)
    • Galaxy Xcover 3 VE (SM-G389F)
    • Galaxy Note 5 (SM-N920A, SM-N920I, SM-N920F, SM-N920G, SM-N920K, SM-N920L, SM-N920S, SM-N920C, SM-N920CD, SM-N920W8)
    • Galaxy S6 Edge Plus (SM-G928F, SM-G928I, SM-G928K, SM-G928L, SM-G928S, SM-G928T, SM-G928W8, SM-G9287, SM-G9287C, SM-G928G, SM-G928C, SM-G928N0)
    • Galaxy A3 2016 (SM-A310N0, SM-A310F, SM-A310FD, SM-A310M, SM-A310MD, SM-A310Y)
    • Galaxy A5 2016 (SM-A510F, SM-A510FD, SM-A510M, SM-A510MD, SM-A510Y, SM-A510YD, SM-A510S, SM-A510K, SM-A510L)
    • Galaxy A7 2016 (SM-A710F, SM-A710FD, SM-A710M, SM-A710MD, SM-A710S, SM-A710K, SM-A710L, SM-A710Y)
    • Galaxy S7 (SM-G930F, SM-G930FD, SM-G930S, SM-G930K, SM-G930L, SM-G930W8)
    • Galaxy S7 Edge (SM-G935F, SM-G935FD, SM-G935S, SM-G935K, SM-G935L, SM-G935W8)
    • Galaxy NOTE 7 (SM-N930F, SM-N930FD, SM-N930S, SM-N930K, SM-N930L)
    • Galaxy J7 2016 (SM-J710F, SM-J710FD, SM-J710FN, SM-J710FZ, SM-J710GN, SM-J710K, SM-J710MN)
    • Galaxy J7 Prime (SM-G610F, SM-G610FD, SM-G610FZ, SM-G610L, SM-G610K, SM-G610S, SM-G610Y)

    [*=center]Exynos-based phones moved to Exynos tab in the software
    [*=center]Organized simultaneous access to files between Torrent client and Octoplus Samsung Software - now it is possible to use downloaded files while seeding them
    [*=center]All supported operations described in details in the manual ("Help" button in the software)
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus / Octopus Box Samsung Software v.2.4.8 is out!
​
On your numerous requests, we have added "Repair Network" and "Repair IMEI" operations for a wide range of devices, based on Exynos CPUs.
Please note, that this solution in not permanent and after writing/updating device firmware, it is necessary to repeat "Repair Network" operation, to get an active (enabled) network.
This solution can be useful for users, who don’t have proper Cert file.

If this solution will be useful for you, please write us and we will add "Repair Network" and "Repair IMEI" operations also for other devices, based on Exynos CPUs, which are not included in this update.

Added support for SM-C5010, SM-C7010, SM-G5510, GT-E1207Y.

Added "Repair IMEI"* and "Repair Network"** operations for a wide range of devices, based on Exynos CPUs.
Improved Unlock/Read Codes/Read Cert/Write Cert operations for Galaxy S6 edge+ and Galaxy Note 5 series, based on Exynos CPUs (all available versions of firmware are supported at this point of time).

Octoplus / Octopus Box Samsung Software v.2.4.8 Release Notes:
? Added support for the following models:
​
- SM-C5010 - added Write Firmware, Read/Write QCN, Read/Write NVM, Read/Write Security, Read/Write EFS, Read PIT, Enable DIAG, Enable Hidden Languages
- SM-C7010 - added Write Firmware, Read/Write QCN, Read/Write NVM, Read/Write Security, Read/Write EFS, Read PIT, Enable DIAG, Enable Hidden Languages
- SM-G5510 - added Write Firmware, Read/Write QCN, Read/Write NVM, Read/Write Security, Read/Write EFS, Read PIT, Enable DIAG, Enable Hidden Languages
- GT-E1207Y - added Direct Unlock, Read Codes, Repair IMEI, Read Full Flash, Read EEPROM (thanks to Mr. .::THE ROCK::.)
​
? Added "Repair IMEI" * and "Repair Network" ** operations for the following devices:
​
- SM-G920A, SM-G920AZ, SM-G920K, SM-G920F, SM-G920FD, SM-G920FZ, SM-G920S, SM-G920L, SM-G920I, SM-G920T, SM-G920T1, SM-G920W8
- SM-G925A, SM-G925F, SM-G925FQ, SM-G925K, SM-G925L, SM-G925S, SM-G925I, SM-G925T, SM-G925T1, SM-G925W8
- SM-G928F, SM-G928I, SM-G928K, SM-G928L, SM-G928S, SM-G928T, SM-G9287, SM-G9287C, SM-G928G, SM-G928C, SM-G928N0
- SM-N9208, SM-N920A, SM-N920G, SM-N920I, SM-N920K, SM-N920L, SM-N920S, SM-N920T, SM-N920C, SM-N920CD, SM-N920W8
- SM-T715, SM-T715C, SM-T715N0, SM-T715Y, SM-T815, SM-T815C, SM-T815N0, SM-T815Y
- SM-A310F, SM-A310FD
- SM-A510F, SM-A510FD
- SM-A710F, SM-A710FD
- SM-J120F, SM-J120FN
- SM-J710F, SM-J710FN, SM-J710FZ
- SM-G550F, SM-G550FY
- SM-G610F
- SM-G930F, SM-G930FD
- SM-G935F, SM-G935FD
​
? Improved Unlock / Read Codes / Read Cert / Write Cert operations (supported all available at the moment versions of firmware) for the following devices:
​
- SM-G928F, SM-G928I, SM-G928K, SM-G928L, SM-G928S, SM-G928T, SM-G928W8, SM-G9287, SM-G9287C, SM-G928G, SM-G928C, SM-G928N0
- SM-N9208, SM-N920A, SM-N920F, SM-N920G, SM-N920I, SM-N920K, SM-N920L, SM-N920S, SM-N920T, SM-N920C, SM-N920CD, SM-N920W8
​
? Improved connection procedure for Swift platform-based phones
​
? Fixed "Invalid file format" issue for Write Firmware operation for some devices
​
? Improved Repair IMEI operation for SM-J106H
​
? All supported operations described in details in the manual ("Cable & Manual" button in the software)
​
* Note:
​

  1. Device must be rooted and without SIM card inserted
  2. After performing Repair IMEI operation it is necessary to make Repair Network
  3. It will be necessary to repeat Repair Network operation to get an active (enabled) network after flashing the phone
** Note:
​

  1. Device must be rooted and without SIM card inserted
  2. It will be necessary to repeat Repair Network operation to get an active (enabled) network after flashing the phone

​
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
​
 
S

seferbey

Kıdemli Üye
Kıdemli Üye
Kayıtlı Kullanıcı
[h=2]OCTOPLUS / OCTOPUS BOX SAMSUNG SOFTWARE V.2.4.8 IS OUT![/h]23.02.17
Octoplus / Octopus Box Samsung Software v.2.4.8 is out!
On your numerous requests, we have added "Repair Network" and "Repair IMEI" operations for a wide range of devices, based on Exynos CPUs. Please note, that this solution in not permanent and after writing/updating device firmware, it is necessary to repeat "Repair Network" operation, to get an active (enabled) network. This solution can be useful for users, who don’t have proper Cert file.
If this solution will be useful for you, please write us and we will add "Repair Network" and "Repair IMEI" operations also for other devices, based on Exynos CPUs, which are not included in this update.
Added support for SM-C5010, SM-C7010, SM-G5510, GT-E1207Y.
Added "Repair IMEI"* and "Repair Network"** operations for a wide range of devices, based on Exynos CPUs.
Improved Unlock / Read Codes / Read Cert / Write Cert operations for Galaxy S6 edge+ and Galaxy Note 5 series, based on Exynos CPUs (all available versions of firmware are supported at this point of time).
[h=2]Octoplus / Octopus Box Samsung Software v.2.4.8 Release Notes:[/h]
  • Added support for the following models:
    • SM-C5010 - added Write Firmware, Read/Write QCN, Read/Write NVM, Read/Write Security, Read/Write EFS, Read PIT, Enable DIAG, Enable Hidden Languages
    • SM-C7010 - added Write Firmware, Read/Write QCN, Read/Write NVM, Read/Write Security, Read/Write EFS, Read PIT, Enable DIAG, Enable Hidden Languages
    • SM-G5510 - added Write Firmware, Read/Write QCN, Read/Write NVM, Read/Write Security, Read/Write EFS, Read PIT, Enable DIAG, Enable Hidden Languages
    • GT-E1207Y - added Direct Unlock, Read Codes, Repair IMEI, Read Full Flash, Read EEPROM (thanks to Mr. .::THE ROCK::.)

  • Added "Repair IMEI" * and "Repair Network" ** operations for the following devices:
    • SM-G920A, SM-G920AZ, SM-G920K, SM-G920F, SM-G920FD, SM-G920FZ, SM-G920S, SM-G920L, SM-G920I, SM-G920T, SM-G920T1, SM-G920W8
    • SM-G925A, SM-G925F, SM-G925FQ, SM-G925K, SM-G925L, SM-G925S, SM-G925I, SM-G925T, SM-G925T1, SM-G925W8
    • SM-G928F, SM-G928I, SM-G928K, SM-G928L, SM-G928S, SM-G928T, SM-G9287, SM-G9287C, SM-G928G, SM-G928C, SM-G928N0
    • SM-N9208, SM-N920A, SM-N920G, SM-N920I, SM-N920K, SM-N920L, SM-N920S, SM-N920T, SM-N920C, SM-N920CD, SM-N920W8
    • SM-T715, SM-T715C, SM-T715N0, SM-T715Y, SM-T815, SM-T815C, SM-T815N0, SM-T815Y
    • SM-A310F, SM-A310FD
    • SM-A510F, SM-A510FD
    • SM-A710F, SM-A710FD
    • SM-J120F, SM-J120FN
    • SM-J710F, SM-J710FN, SM-J710FZ
    • SM-G550F, SM-G550FY
    • G610F
    • SM-G930F, SM-G930FD
    • SM-G935F, SM-G935FD

  • Improved Unlock / Read Codes / Read Cert / Write Cert operations (supported all available at the moment versions of firmware) for the following devices:
    • SM-G928F, SM-G928I, SM-G928K, SM-G928L, SM-G928S, SM-G928T, SM-G928W8, SM-G9287, SM-G9287C, SM-G928G, SM-G928C, SM-G928N0
    • SM-N9208, SM-N920A, SM-N920F, SM-N920G, SM-N920I, SM-N920K, SM-N920L, SM-N920S, SM-N920T, SM-N920C, SM-N920CD, SM-N920W8

  • Improved connection procedure for Swift platform-based phones
  • Fixed "Invalid file format" issue for Write Firmware operation for some devices
  • Improved Repair IMEI operation for SM-J106H
  • All supported operations described in details in the manual ("Help" button in the software)
* Note:

  1. Device must be rooted and without SIM card inserted
  2. After performing Repair IMEI operation it is necessary to make Repair Network
  3. It will be necessary to repeat Repair Network operation to get an active (enabled) network after flashing the phone
** Note:

  1. Device must be rooted and without SIM card inserted
  2. It will be necessary to repeat Repair Network operation to get an active (enabled) network after flashing the phone
 
S

sas24

Deneyimli Üye
Deneyimli Üye
Kayıtlı Kullanıcı
çoşmuş tüm modeller repair var nerdeyse....


Added "Repair IMEI" * and "Repair Network" ** operations for the following devices:

  • SM-G920A, SM-G920AZ, SM-G920K, SM-G920F, SM-G920FD, SM-G920FZ, SM-G920S, SM-G920L, SM-G920I, SM-G920T, SM-G920T1, SM-G920W8
  • SM-G925A, SM-G925F, SM-G925FQ, SM-G925K, SM-G925L, SM-G925S, SM-G925I, SM-G925T, SM-G925T1, SM-G925W8
  • SM-G928F, SM-G928I, SM-G928K, SM-G928L, SM-G928S, SM-G928T, SM-G9287, SM-G9287C, SM-G928G, SM-G928C, SM-G928N0
  • SM-N9208, SM-N920A, SM-N920G, SM-N920I, SM-N920K, SM-N920L, SM-N920S, SM-N920T, SM-N920C, SM-N920CD, SM-N920W8
  • SM-T715, SM-T715C, SM-T715N0, SM-T715Y, SM-T815, SM-T815C, SM-T815N0, SM-T815Y
  • SM-A310F, SM-A310FD
  • SM-A510F, SM-A510FD
  • SM-A710F, SM-A710FD
  • SM-J120F, SM-J120FN
  • SM-J710F, SM-J710FN, SM-J710FZ
  • SM-G550F, SM-G550FY
  • G610F
  • SM-G930F, SM-G930FD
  • SM-G935F, SM-G935FD
 
S

seferbey

Kıdemli Üye
Kıdemli Üye
Kayıtlı Kullanıcı
evet usta çoğunu eklemiş en azından artık ikinci bi seçenek var :)
 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus / Octopus Box Samsung Software v.2.6.0 is out!
​
Added world's first Repair IMEI and Repair Network for Galaxy J5/Pro 2017, Galaxy J7/Pro 2017 and Galaxy J7 Neo/Nxt series.

Added world's first Repair IMEI and Repair Network for Galaxy A3 2017 Galaxy and J7 Prime series of devices with Android 7.0 firmwares.


Octoplus / Octopus Box Samsung Software v.2.6.0 Release Notes:
Added support for the following models:​
- SM-J530F - added world's first Repair IMEI* and Repair Network**
- SM-J530FM - added world's first Repair IMEI* and Repair Network**
- SM-J530G - added world's first Repair IMEI* and Repair Network**
- SM-J530GM - added world's first Repair IMEI* and Repair Network**
- SM-J530K - added world's first Repair IMEI* and Repair Network**
- SM-J530L - added world's first Repair IMEI* and Repair Network**
- SM-J530Y - added world's first Repair IMEI* and Repair Network**
- SM-J530YM - added world's first Repair IMEI* and Repair Network**
- SM-J730F - added world's first Repair IMEI* and Repair Network**
- SM-J730FM - added world's first Repair IMEI* and Repair Network**
- SM-J730G - added world's first Repair IMEI* and Repair Network**
- SM-J730GM - added world's first Repair IMEI* and Repair Network**
- SM-J730K - added world's first Repair IMEI* and Repair Network**
- SM-J701F - added Direct Unlock, Repair IMEI* (world's first), Repair Network** (world's first), Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Read PIT, Reboot in Download/Recovery Mode
- SM-J701FD - added Direct Unlock, Repair IMEI* (world's first), Repair Network** (world's first), Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Read PIT, Reboot in Download/Recovery Mode
- SM-J701M - added Direct Unlock, Repair IMEI* (world's first), Repair Network** (world's first), Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Read PIT, Reboot in Download/Recovery Mode
- SM-J701MT - added Direct Unlock, Repair IMEI* (world's first), Repair Network** (world's first), Read/Write Cert, Write Firmware, Read/Write Security, Read/Write EFS, Read PIT, Reboot in Download/Recovery Mode
- SM-A320F - added world's first Repair IMEI* and Repair Network** (for Android 7.0 firmwares)
- SM-A320FL - added world's first Repair IMEI* and Repair Network** (for Android 7.0 firmwares)
- SM-A320Y - added world's first Repair IMEI* and Repair Network** (for Android 7.0 firmwares)
- SM-G610F - added world's first Repair IMEI* and Repair Network** (for Android 7.0 firmwares)
- SM-G610FD - added world's first Repair IMEI* and Repair Network** (for Android 7.0 firmwares)
- SM-G610FZ - added world's first Repair IMEI* and Repair Network** (for Android 7.0 firmwares)

​
Improved “Repair Network" operation for Galaxy A3, A5, A7 and S7 series.
​
Improved "Repair IMEI” operation for Galaxy S6 Edge and Note 5 series.​
* Note:
1. Device must be rooted and SIM card must be removed from the device
2. After performing “Repair IMEI” operation it is necessary to perform “Repair Network”
3. It will be necessary to repeat “Repair Network” operation to get an active (enabled) network after phone flashing​
** Also, note:
1. Device must be rooted and SIM card must be removed from the device.
2. It will be necessary to repeat “Repair Network” operation to get an active (enabled) network after phone flashing​
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

​
 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus / Octopus Box Samsung Software v.2.6.1 is out!
​
As you know, all main unique Reset FRP / Reactivation solutions (solution via Download Mode, solution for Exynos CPU-based devices with UFS memory chips) were developed by Octoplus Team. We continue to work hard to give Octoplus users best experience and solutions for servicing mobile phones. In this update we are proud to introduce a new world's first Reset FRP / Reactivation solution which works via Micro UART cable for devices with eMMC memory chip.


Octoplus / Octopus Box Samsung Software v.2.6.1 Release Notes:
Added world's first Reset FRP / Reactivation lock “Via UART (eMMC memory chip)”* operation via Micro UART cable for devices with eMMC memory chip:
- SM-A310F, SM-A310FD, SM-A310M, SM-A310N0, SM-A310MD, SM-A310Y
- SM-A510F, SM-A510FD, SM-A510M, SM-A510MD, SM-A510Y, SM-A510YD, SM-A510S, SM-A510K, SM-A510L
- SM-A710F, SM-A710FD, SM-A710M, SM-A710MD, SM-A710Y, SM-A710S, SM-A710K, SM-A710L
- SM-G570F, SM-G570FD, SM-G570M, SM-G570MD, SM-G570Y
- SM-G610F, SM-G610FD, SM-G610FZ, SM-G610M, SM-G610L, SM-G610K, SM-G610S, SM-G610Y
- SM-J7108, SM-J710F, SM-J710FQ, SM-J710FZ, SM-J710FD, SM-J710FN, SM-J710GN, SM-J710K, M-J710MN
- SM-T580, SM-T585, SM-T585C

​
To perform new reset FRP operation, do the following steps:
1. Select the abovementioned device model in Software's list.
2. Press “Reset FRP / Reactivation” button.
3. Select first Reset FRP / Reactivation lock method (press “Via UART (EMMC memory chip)” button).
4. Connect the phone to Box via Samsung Micro UART cable.
5. Press and hold "Vol-" and "Power" buttons for 15-20 seconds and wait until software requests to connect Micro USB cable.
6. Connect the phone to PC via Micro USB cable. Software will read certain data.
7. Connect the phone to Box again via Samsung Micro UART cable according to Software request.
8. Press and hold "Vol-" and "Power" buttons for 15-20 seconds.
9. Follow software instructions (prompts).​
* Note: this operation works for the mentioned above devices with Android 6.x firmwares' versions and may not work for some phones’ S-boot. In this case try to write another firmware version or only S-boot from firmware and repeat the operation again.​
Added support for the following models:
​
- SM-G892U - added Read Codes via server, Read / Write NVM, Read / Write QCN, Reboot in Download / Recovery mode, Read PIT – world's first
- SC-01K - added Read Codes via server, Read / Write NVM, Read / Write QCN, Reboot in Download / Recovery mode, Read PIT
- SCV37 - added Read Codes via server, Read / Write NVM, Read / Write QCN, Reboot in Download / Recovery mode, Read PIT
- SM-T385 - added Read Codes via server, Read / Write NVM, Read / Write QCN, Reboot in Download / Recovery mode, Read PIT
- SM-T385C - added Read Codes via server, Read / Write NVM, Read / Write QCN, Reboot in Download / Recovery mode, Read PIT
- SM-G950U - added Direct Unlock (Sprint) (in test mode, root needed)
- SM-G955U - added Direct Unlock (Sprint) (in test mode, root needed)
- SM-N950U - added Direct Unlock (Sprint) (in test mode, root needed)
- SM-G532F - added Repair Security**, Read Codes (no root needed)
- SM-G532FD - added Repair Security**, Read Codes (no root needed)
- SM-G532G - added Repair Security**, Read Codes (no root needed)
- SM-G532M - added Repair Security**, Read Codes (no root needed)
- SM-G532MT - added Repair Security**, Read Codes (no root needed)
- SM-J100M - added Repair IMEI, Repair Network
- SM-J100F - added Repair IMEI, Repair Network
- SM-J100FN - added Repair IMEI, Repair Network
- SM-J100G - added Repair IMEI, Repair Network
- SM-J100MU - added Repair IMEI, Repair Network
- SM-J100MV - added Repair IMEI, Repair Network
- SM-J100Y - added Repair IMEI, Repair Network
- SM-G388F - added Repair IMEI, Repair Network
- SM-G531F - added Repair IMEI, Repair Network
- SM-G531BT - added Repair IMEI, Repair Network
- SM-G531Y - added Repair IMEI, Repair Network
- SM-G361F - added Repair IMEI, Repair Network
- SM-J110F - added Repair IMEI, Repair Network
- SM-J110G - added Repair IMEI, Repair Network
- SM-J110M - added Repair IMEI, Repair Network
- SM-T2397 - added Repair IMEI, Repair Network

​
Improved “Repair IMEI” and “Repair Network” operations for Spreadtrum devices​
Improved connection operation via UART for "Reset FRP via UART (UFS)" operation
​
Improved Unlock operation for SM-J701F, SM-J701FD, SM-J701M and SM-J701MT devices
​
** “Repair Security” operation will reset IMEI to its original version!


​
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

​
Find out more at:
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

​
 
Byaras™

Byaras™

Kurucu Admin
Yönetici
Admin
WebMaster
samsung a710fd frp uart kablo ve aşadaki modeller kolay yöntem oluş güzel günceleme

- SM-A310F, SM-A310FD, SM-A310M, SM-A310N0, SM-A310MD, SM-A310Y
- SM-A510F, SM-A510FD, SM-A510M, SM-A510MD, SM-A510Y, SM-A510YD, SM-A510S, SM-A510K, SM-A510L
- SM-A710F, SM-A710FD, SM-A710M, SM-A710MD, SM-A710Y, SM-A710S, SM-A710K, SM-A710L
- SM-G570F, SM-G570FD, SM-G570M, SM-G570MD, SM-G570Y
- SM-G610F, SM-G610FD, SM-G610FZ, SM-G610M, SM-G610L, SM-G610K, SM-G610S, SM-G610Y
- SM-J7108, SM-J710F, SM-J710FQ, SM-J710FZ, SM-J710FD, SM-J710FN, SM-J710GN, SM-J710K, M-J710MN
- SM-T580, SM-T585, SM-T585C

[video=youtube;-b4NWQZEwVA]https://www.youtube.com/watch?v=-b4NWQZEwVA[/video]
 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus/Octopus Suite v.1.5.2 is out!

This software version is adapted to new, readjusted back-end server architecture. To ensure effective operation of on-line services (Samsung Factory Unlock, Samsung TMB Unlock, Read Codes, Samsung Factory Reset FRP/Reactivation, SE/Sony/Datacards/Modems remote Unlock/Repair IMEI and others), please always use the latest Software version.
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus FRP Tool v.1.1.5 is out! New brands, new models and some improvements added!

Octoplus FRP Tool v.1.1.5 Release Notes:
​
Added “Reset FRP” feature for the following devices:​

  • Aelion Champagne (I7)

  • Assistant AS-5435

  • Asus ZenFone Live ZB501KL (A007) (thanks to Mr. enable43)

  • Blu Vivo 5 Mini (V050)

  • Bravis A504 Trace
  • Bravis NB85

  • Evolveo StrongPhone Q7 LTE

  • Gretel A7

  • Leagoo KIICAA Power
  • Leagoo M9
  • Leagoo S8 Pro

  • Lenovo K3 Note (K50a40)
  • Lenovo K3 Note (K50-t5)
  • Lenovo K3 Note (K50-t3s)

  • LG X500 / X Power 2 (X320K)
  • LG X500 / X Power 2 (X320L)
  • LG X500 / X Power 2 (X320S) (thanks to Mr. MARVZ_TG)
  • LG Stylo 2 (VS835) (thanks to Mr. chipscell)

  • Motorola Moto G4 Play (XT1601) (thanks to Mr. rasgula)

  • Vodafone Smart Ultra 7 (VFD700)

  • Wileyfox Spark X
Improved connect procedure for most MediaTek CPU-based devices​
New Samsung combination firmwares were uploaded into the Support Area​
All supported operations are described in details in Software manual (“Help” button in Software)
​

This software version is adapted to new, improved back-end Huawei FRP server architecture. To ensure successful performance of Reset FRP operation for supported Huawei devices, please always use the latest Software version!

Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
or
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
are already available for purchase from GsmServer Store. Ask your local dealers!
​
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus / Octopus Box Samsung Software v.2.6.5 is out!
​
Octoplus / Octopus Box Samsung Software v.2.6.5 Release Notes:
�� Added support for the following models:
- SM-J250F - added Read Codes (via server), Read/Write NVM, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode
- SM-J250G - added Read Codes (via server), Read/Write NVM, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode
- SM-J250M - added Read Codes (via server), Read/Write NVM, Read/Write QCN, Read PIT, Write Firmware, Reboot in Download/Recovery mode

​
�� Added Reset FRP via ADB (combination method) for the following devices:
- J530F, J530FM, J530G, J530GM, J530K, J530L, J530Y, J530YM
- J730F, J730FM, J730G, J730GM, J730K
- N9500, N9508, N950F, N950FD, N950N, N950U, N950U1, N950W
- G9500, G9508, G950D, G950F, G950FD, G950J, G950N, G950U, G950U1, G950V, G950W
​
Note: before you write any combination firmware, please read
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
�� New combination firmwares were uploaded into the Support Area.
​
�� Some adjustments and improvements were made.
​
�� All supported operations described in details in the manual ("Cable & Manual" button in the software).
​
This software version is adapted to new, improved back-end server architecture. To ensure effective operation of on-line services (Samsung Factory Unlock, Samsung TMB Unlock, Read Codes, Samsung Factory Reset FRP/Reactivation), please always use the latest Software version.
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus/Octopus Box LG v.2.8.0 is out!
​
Added Unlock via server for LG TMB (with “Device Unlock App") devices and more!

Octoplus/Octopus Box LG Software v.2.8.0 Release Notes:
Added support for the following models:​
- H345 - added Unlock via server (without erasing/wiping data, need root)
- MS345 - added Unlock via server (without erasing/wiping data, need root)
- H631 - added Unlock via server (without erasing/wiping data, need root)
- MS631 - added Unlock via server (without erasing/wiping data, need root)
- H811, H811VK - added Unlock via server (without erasing/wiping data, need root)
- K330 - added Unlock via server (without erasing/wiping data, need root)
- MS330 - added Unlock via server (without erasing/wiping data, need root)
- K428 - added Unlock via server (without erasing/wiping data, need root)
- MS428 - added Unlock via server (without erasing/wiping data, need root)
- K550, K550BN, K550BNGO1 - added Unlock via server (without erasing/wiping data, need root)
- MS550 - added Unlock via server (without erasing/wiping data, need root)
- M210 - added Unlock via server (without erasing/wiping data, need root)
- MS210 - added Unlock via server (without erasing/wiping data, need root)
- MP260 - added Unlock via server (without erasing/wiping data, need root)
- TP260 - added Unlock via server (without erasing/wiping data, need root)
- MP450 - added Unlock via server (without erasing/wiping data, need root)
- TP450 - added Unlock via server (without erasing/wiping data, need root)
- X210MA - added Unlock via server (without erasing/wiping data, need root, in test mode)
- H901 - added Unlock via server (without erasing/wiping data, need root, in test mode)
- H918 - added Unlock via server (without erasing/wiping data, need root, in test mode)
- H932, H932U - added Unlock via server (without erasing/wiping data, need root, in test mode)
- H830 - added Unlock via server (without erasing/wiping data, need root, in test mode)
- H872 - added Unlock via server (without erasing/wiping data, need root, in test mode)
- H870AR, H870I - added world's first Direct Unlock, Repair IMEI A, Reset FRP, Write Firmware, Read/Write NVM, Read/Write QCN, Read/Reset Security, Repair BT/W-Fi MAC Address, Read Full Flash
- US610 - added Repair IMEI, Write Firmware, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Reset FRP, Reset Screen Lock, Read Full Flash, Repair MEID, Read/Write PRL, Repair AKEY/SSD_A/SSD_B/OTKSL/SPC (thanks to Mr. himig_natin)
- X220DSH - added Direct Unlock, Repair IMEI A/B, Read Codes, Write Firmware, Reset FRP, Read/Write Full Flash, Read Info (thanks to Mr. leandro_grilo)
- F720K, F720L, F720S - added Reset FRP (thanks to Mr. saeedullah_khan)
- M700TV - added Repair IMEI B
​
Improved Read Codes and Direct Unlock operations for LG X240 (thanks to Mr. kent99)
​
All supported operations are described in details in Software manual ("Cable & Manual" button in Software)


​
Promo period:
from 22.02.2018 till 31.03.2018 – LG TMB “Unlock” operation will take only 115 Octopus/Octoplus credits.​
Postpromo period:
from 01.04.2018 – LG TMB “Unlock” operation will take 185 Octopus/Octoplus credits.


​
You can buy Octopus/Octoplus Server Credits from your
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
or directly
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
.
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus FRP Tool v.1.1.6 is out! Added support for Alcatel, Moto, Oppo and more!

Octoplus FRP Tool v.1.1.6 Release Notes:
Added “Reset FRP” feature for the following devices:
​

  • Alcatel A3 XL (OT-9008D)
  • Alcatel A5 LED (OT-5085D)
  • Alcatel U5 HD (OT-5047D)
  • Alcatel OneTouch Pixi 4 (6) (OT-9001A)
  • Alcatel OneTouch Pixi 4 (6) (OT-9001D)
  • Alcatel OneTouch Pixi 4 (6) (OT-9001I)
  • Alcatel OneTouch Pixi 4 (6) (OT-9001X)
  • Alcatel OneTouch Pixi 4 (7 3G) (OT-9003A)
  • Alcatel OneTouch Pixi 4 (7 3G) (OT-9003X)
  • Alcatel OneTouch Pixi 4 (7 WiFi) (OT-8063)
  • Alcatel OneTouch Pop 3 (5.5) (OT-5025D)
  • Alcatel OneTouch Pop 4S (OT-5095K)
  • Alcatel OneTouch Pop 4S (OT-5095Y)
  • Alcatel OneTouch Pop 4 (6) (OT-7070F)

  • BQ Aquaris U Plus (thanks to Mr. humb11luis)

  • Condor Plume P6 Plus (PGN-522) (thanks to Mr. DZ-DEVELOPER)

  • Huawei Nexus 6P (H1511) (thanks to Mr. nefhamid)

  • Motorola Moto Z2 Play (XT1710-02)
  • Motorola Moto Z2 Play (XT1710-06)
  • Motorola Moto Z2 Play (XT1710-07)
  • Motorola Moto Z2 Play (XT1710-08)
  • Motorola Moto Z2 Play (XT1710-09) (thanks to Mr. amar22)
  • Motorola Moto Z2 Play (XT1710-10)
  • Motorola Moto Z2 Play (XT1710-11)

  • Multilaser MS50L (thanks to Mr. leandro_grilo)

  • Oppo A53
  • Oppo F3 (CPH1609)
  • Oppo R7g
  • Oppo R9s Plus (CPH1611)

  • Prestigio PSP5530 (thanks to Mr. Dr_Wolodya)

  • ZTE Axon 7 (A2017U) (thanks to Mr. henry_mk4)
New Samsung combination firmwares were uploaded into the Support Area
​
All supported operations are described in details in Software manual (“Help” button in Software)


​
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
or
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
are already available for purchase from GsmServer Store. Ask your local dealers!​
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus/Octopus Suite v.1.5.3 is out! Added unlock via server for a wide range of LG models!

Added Unlock via server for LG TMB/MPCS devices (with “Device Unlock App").Octoplus/Octopus Suite v.1.5.3 Release Notes:

Added Unlock via server for the following LG TMB/MPCS devices (with “Device Unlock App"):
​

  • H345 - added Unlock via server (without erasing/wiping data, requires root)
  • MS345 - added Unlock via server (without erasing/wiping data, requires root)
  • H631 - added Unlock via server (without erasing/wiping data, requires root)
  • MS631 - added Unlock via server (without erasing/wiping data, requires root)
  • H811, H811VK - added Unlock via server (without erasing/wiping data, requires root)
  • K330 - added Unlock via server (without erasing/wiping data, requires root)
  • MS330 - added Unlock via server (without erasing/wiping data, requires root)
  • K428 - added Unlock via server (without erasing/wiping data, requires root)
  • MS428 - added Unlock via server (without erasing/wiping data, requires root)
  • K550, K550BN, K550BNGO1 - added Unlock via server (without erasing/wiping data, requires root)
  • MS550 - added Unlock via server (without erasing/wiping data, requires root)
  • M210 - added Unlock via server (without erasing/wiping data, requires root)
  • MS210 - added Unlock via server (without erasing/wiping data, requires root)
  • MP260 - added Unlock via server (without erasing/wiping data, requires root)
  • TP260 - added Unlock via server (without erasing/wiping data, requires root)
  • MP450 - added Unlock via server (without erasing/wiping data, requires root)
  • TP450 - added Unlock via server (without erasing/wiping data, requires root)
  • X210MA - added Unlock via server (without erasing/wiping data, requires root)
  • H901 - added Unlock via server (without erasing/wiping data, requires root)
  • H918 - added Unlock via server (without erasing/wiping data, requires root)
  • H932, H932U - added Unlock via server (without erasing/wiping data, requires root)
  • H830 - added Unlock via server (without erasing/wiping data, requires root)
  • H872 - added Unlock via server (without erasing/wiping data, requires root)
How to perform "TMB Unlock" operation:
​

  • Select proper model from the list in the Software
  • Press "TMB Unlock" button
  • Follow the Software instructions
Note:
​

  • Price for users without Octopus/Octoplus box - 250 credits
  • Price for Octopus/Octoplus users without LG activation - 200 credits
  • Price for Octopus/Octoplus LG owners - 115 credits

​
Also, before performing TMB/MPCS Unlock operation, read
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.


You can buy Octopus/Octoplus Server Credits from your local reseller or directly
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus / Octopus Box Samsung Software v.2.6.6 is out! Unlock via server for more TMB devices added!
​
Added Factory Unlock via server for Samsung TMB (with “Device Unlock App") SM-G360T, SM-G360T1, SM-G530T, SM-G530T1, M-J327T, SM-J327T1, SM-J727T, SM-J727T1.

Added Factory Unlock via server method for Samsung TMB SM-G930T and SM-G935T.

Some adjustments and improvements were made.

Octoplus / Octopus Box Samsung Software v.2.6.6 Release Notes:
? Added support for the following models:​
- SM-G360T - added Unlock via server (requires root), Read/Write NVM, Read/Write QCN, Enable Diag, Write Firmware, Read PIT, Reboot in Download/Recovery mode
- SM-G360T1 - added Unlock via server (requires root), Read/Write NVM, Read/Write QCN, Enable Diag, Write Firmware, Read PIT, Reboot in Download/Recovery mode
- SM-G530T - added Unlock via server (requires root), Read/Write NVM, Read/Write QCN, Enable Diag, Write Firmware, Read PIT, Reboot in Download/Recovery mode
- SM-G530T1 - added Unlock via server (requires root), Read/Write NVM, Read/Write QCN, Enable Diag, Write Firmware, Read PIT, Reboot in Download/Recovery mode
- SM-J327T - added Unlock via server, Reset FRP/Reactivation, Read/Write security, Read/Write EFS, Write Firmware, Read PIT, Reboot in Download/Recovery mode
- SM-J327T1 - added Unlock via server, Reset FRP/Reactivation, Read/Write security, Read/Write EFS, Write Firmware, Read PIT, Reboot in Download/Recovery mode
- SM-J727T - added Unlock via server, Reset FRP/Reactivation, Read/Write security, Read/Write EFS, Write Firmware, Read PIT, Reboot in Download/Recovery mode
- SM-J727T1 - added Unlock via server, Reset FRP/Reactivation, Read/Write security, Read/Write EFS, Write Firmware, Read PIT, Reboot in Download/Recovery mode
- SM-G930T* - added Unlock via server (new method)
- SM-G935T* - added Unlock via server (new method)
- SM-G9200 - added Reset FRP/Reactivation lock (via UART)
- SM-G9208 - added Reset FRP/Reactivation lock (via UART)
- SM-G9209 - added Reset FRP/Reactivation lock (via UART)
- SM-G920P - added Reset FRP/Reactivation lock (via UART)
- SM-G920R4 - added Reset FRP/Reactivation lock (via UART)
- SM-G925P - added Reset FRP/Reactivation lock (via UART)
- SM-G928P - added Reset FRP/Reactivation lock (via UART)
- SM-N9200 - added Reset FRP/Reactivation lock (via UART)
- SM-N920P - added Reset FRP/Reactivation lock (via UART)
​
*Note: from now on two methods for Unlock via server are available for SM-G930T and SM-G935T - fast factory method (works with devices, which have an original, not changed security) and old method (works with devices, which have an original or changed/damaged security).

? Improved “Unlock” operation for TMB SM-G950U, SM-G950U1, SM-G955U, SM-G955U1, SM-N950U, SM-N950U1 and SM-G892U (for devices with “Security damaged" problem).

? New combination firmwares were uploaded into the Support Area.

? Some adjustments and improvements were made.

TMB “Unlock” operation takes only 100 Octopus/Octoplus credits.

You can buy Octopus/Octoplus Server Credits from your
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
or directly
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
.
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus/Octopus Box LG v.2.8.1 is out! Added world's first support for the latest firmwares for LG K10 2017, X Power 2, Stylus 3 and more!
​
As you know, Octoplus Team developed most of main unique Reset FRP solutions for Samsung (UART methods) and LG devices. We continue to work hard to provide Octoplus users with the best experience and solutions for mobile phones servicing. In this update, we are proud to present a new world's first Reset FRP, Repair IMEI and Direct Unlock solution for MediaTek CPU-based devices for the latest firmware versions! From now on, mentioned operations are supported for all available firmware versions and for all security patch levels! There is no need in risky firmware downgrade - all operations can be performed directly!

Octoplus/Octopus Box LG Software v.2.8.1 Release Notes:
�� Released new world's first Reset FRP, Repair IMEI and Unlock solutions (from now on, these operations work for all firmware versions and latest security patch levels) for the next MediaTek CPU-based devices:
- M250, M250AR, M250E, M250F, M250H, M250N, M250Y, M250YK
- M250DS, M250DSN, M250I, M250K, M250M
- M320AR, M320F, M320N, M320H, M320K
- M320, M320DSN, M320TV
- M400AR, M400F, M400MT, M400Y
- M400DF, M400DK, M400DY, M400N
​
�� Added support for the following models:
- K121K - added Unlock, Read Codes, Repair IMEI, Repair BT/Wi-Fi MAC Address, Write Firmware, Read/Write EEPROM, Reset FRP, Read Full Flash, Read Info, Factory Reset (for Factory Reset Status 2)
- K121L - added Unlock, Read Codes, Repair IMEI, Repair BT/Wi-Fi MAC Address, Write Firmware, Read/Write EEPROM, Reset FRP, Read Full Flash, Read Info, Factory Reset (for Factory Reset Status 2)
- K121S - added Unlock, Read Codes, Repair IMEI, Repair BT/Wi-Fi MAC Address, Write Firmware, Read/Write EEPROM, Reset FRP, Read Full Flash, Read Info, Factory Reset (for Factory Reset Status 2)
- X210MA - added Repair IMEI, Write Firmware, Read/Write NVM, Read/Write QCN, Read Security, Read Full Flash (thanks to Mr. mysty619)
- X230DSV - Direct Unlock (in a test mode), Read Codes, Repair IMEI (A/B), Write Firmware, Reset FRP, Read / Write Full Flash
- DM-02H (DS1604) - added Repair IMEI, Read/Write/Reset Security, Read/Write NVM, Read/Write QCN, Repair BT / Wi-Fi MAC Address, Reset FRP, Read Full Flash (thanks to Mr. mimarijaz71)
​
�� Some adjustments and improvements were made.
​
��All supported operations are described in details in Software manual ("Cable & Manual" button in Software)
​
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

​
 
T

turkcellgsm

Tecrübeli Üye
Tecrübeli Üye
Kayıtlı Kullanıcı
Octoplus FRP Tool v.1.2.2 is out! New unique world's first Reset FRP solution for LG V20, G6, G5, K10 2107, X Power 2 series and more!

Octoplus FRP Tool v.1.2.2 Release Notes:
Released new unique world's first Reset FRP solution (via Download Mode), that works for all firmware versions and latest security patch levels for the following LG devices:
​

  • LG V20 Series:
    - H910, H910PR
    - H915
    - H918
    - H990, H990DS, H990N, H990T, H990TR
    - LS997
    - VS995
    - US996
    - F800K, F800L, F800S

  • LG G6 Series:
    - H870, H870DS, H870DSU, H870K, H870S, H870U, H870V
    - H871
    - H872, H872PR
    - H873
    - G600K, G600L, G600S, G600KP, G600LP, G600SP
    - LS993
    - VS988

  • LG G5 Series:
    - H820, H820PR
    - H830, H830SV
    - H831
    - H850, H850AR, H850K, H850TR
    - H858
    - H860, H860N
    - H868
    - LS992
    - US992
    - VS987
    - RS988
    - F700K, F700L, F700S

  • LG K10 2017 / X400 Series:
    - K121K, K121L, K121S

  • LG X Power 2 / X500 Series:
    - X320K, X320L, X320S
Added “Reset FRP” for the following devices: ​

  • BLU Studio X6 / S490U (thanks to Mr. darkside85)

  • Dialog Blaze M50E-1A (thanks to Mr. imanka)

  • Energizer Energy S500E (thanks to Mr. imanka)

  • Lava Z10 (thanks to Mr. pandoragsm)

  • LG G6 (H870AR) (released two methods - via Download Mode and via Test Point, all firmware versions and latest security patch levels are supported)
  • LG G6 (H870I) (released two methods - via Download Mode and via Test Point, all firmware versions and latest security patch levels are supported)
  • LG G6 (LS993) (via Test Point, all firmware versions and latest security patch levels are supported)
  • LG Q6 (X600K) (via Test Point, all firmware versions and latest security patch levels are supported)
  • LG Q6 (X600L) (via Test Point, all firmware versions and latest security patch levels are supported)
  • LG Q6 (X600S) (via Test Point, all firmware versions and latest security patch levels are supported) (thanks to Mr. Denozaur)
  • LG Q6+ (X600KP) (via Test Point, all firmware versions and latest security patch levels are supported)
  • LG Q6+ (X600LP) (via Test Point, all firmware versions and latest security patch levels are supported)
  • LG Q6+ (X600SP) (via Test Point, all firmware versions and latest security patch levels are supported)

  • Lyf Wind 6 (LS-5009) (thanks to Mr. deeptelecomzira)

  • Motorola Moto E (4th Gen) (XT1765) (thanks to Mr. darkside85)

  • NGM Dynamic E451 (thanks to Mr. angelkid)

  • Panasonic Eluga Pulse X (thanks to Mr. pandoragsm)

  • Tecno Camon I (IN5) (thanks to Mr. pandoragsm)
  • Tecno Camon I Air (IN3) (thanks to Mr. pandoragsm)
  • Tecno Spark Pro (K8) (thanks to Mr. reibanoor)

  • Wiko Robby (thanks to Mr. BxS4ever)
  • Wiko Sunny 2 (thanks to Mr. equinoks)

All supported operations are described in details in Software manual (“Help” button in Software)


​
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
or
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
are already available for purchase from GsmServer Store. Ask your local dealers!
​
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
 
Cevap yazmak için giriş yap yada kayıt ol.
Üst